WOT TRIGGER INSTALLATION PROCEDURE.
The WOT (Wide Open Trigger) is a high-performance forced reset trigger designed to improve firing speed and responsiveness on AR-platform rifles. For AR builders and firearm enthusiasts, the wot trigger installation can be a game-changing upgrade—if done correctly. This step-by-step guide walks you through the full installation process so you can enhance your rifle safely and confidently.
⚠️ Safety First During The Wot Trigger installation Process
Before handling or modifying any firearm:
- Ensure the firearm is completely unloaded.
- Remove the magazine and check the chamber twice.
- Always wear safety glasses during installation.
- Check your local, state, and federal laws to confirm legality.
🔧 Tools You’ll Need
- Punch set
- Small gunsmithing hammer
- Needle-nose pliers
- Gun oil/lubricant
- Bench block or similar support
- Safety glasses
- WOT Trigger kit
- AR-15 lower receiver (stripped or assembled)
Step-by-Step Process on the Wot Trigger Installation
Step 1: Separate Upper and Lower Receivers
Disassemble your AR by separating the upper and lower receivers. Set the upper aside in a safe place.
Step 2: Remove Existing Trigger Components
Using a punch and hammer, carefully tap out the hammer and trigger pins. Remove the existing trigger, disconnector, and hammer from the lower receiver.
Step 3: Clean the Lower Receiver
Wipe down the interior of the trigger pocket to remove carbon buildup or debris. This ensures smooth operation of the new trigger.
Step 4: Install the WOT Trigger Assembly
Insert the WOT Trigger group into the lower receiver. Align the holes with your punch tool, and then install the trigger pin. Ensure it’s flush on both sides.
Step 5: Install the WOT Hammer
Place the WOT hammer in its correct orientation. Compress the hammer spring and align it into position. Insert the hammer pin and tap it into place gently.
Step 6: Function Check
With the upper still removed, manually test the trigger. Ensure that:
- The hammer locks back when cycled
- The trigger resets properly after each pull
- There is no mechanical binding or resistance
Step 7: Reassemble and Final Test
Reconnect the upper and lower receivers. Perform a dry fire test with snap caps or dummy rounds. Once you confirm the function is correct and safe, you’re ready to head to the range.
🔄 Final Tips On Wot Trigger Installation
- Don’t over-lubricate—apply oil sparingly to moving parts.
- Use quality tools to avoid damaging pins or components.
- If you’re unsure, consult a qualified gunsmith.
- Always stay updated on changing ATF regulations around forced reset triggers.
🛒 Looking for Quality AR Parts?
Visit buycaluanieonline.com/shop to browse a wide range of AR-15 parts, accessories, and tools for your next build. While we currently don’t carry the WOT Trigger due to evolving regulations, we offer everything you need to upgrade your rifle legally and reliably.